York, PA (717) 755-2911 |
Carl Beasley Ford offers the following discount on parts for LSHOC members. As an LSHOC member you can get 25% off Ford parts and a discount on Motorsport parts (they are a stocking dealer). Thank LSHOC member and Carl Beasley Ford employee John Herbert for setting this up. If you want details on how to get the discount, email Brad. |
Collegeville, PA (610) 489-9366 |
Dave Savage is a technician there, enjoys working on SHO's and owns a 1993 Automatic. |
(Joshua Teixeira) RR# 3 1 Windermere Drive Ingleside, Ontario Canada K0C 1M0 |
Yeah, I know he isn't local. But the deal that Josh offers on new Ford Cluch Kits is unbeatable. $219 for the clutch disk, pressure plate, and throwout bearing delivered to your door. Highly recommended by Brad Rauch (I have dealt with him several times.) He also sells new Ford MTX plug wires for $85 delivered (or for $75 with a clutch kit order). |
422 Business Center (aka The Windmills) 940 N. Circle Drive P.O. Box 157 Oaks, PA 19456 (610) 630-6563 |
From Ted Straub: "These folks are Ford performance specialists. They mainly prep race cars, but are very amenable to basic maintenance work. The mechanic's name is Bob (of course, and he has done a clutch job, aluminum subframe bushings, engine mounts and other basic maintenance on my 94.) I first went to them when they were the only shop around willing to custom fabricate a six-point cage to my specification. They are game for anything and understand the need for speed. They also made a custom B-pillar harness bar for Cal Cloutier who came all the way down from New York to have them do the work." |
10 N. Sycamore Street Newtown, PA 18940 (215) 968-3806. |
Speak to Eric. 15% discount for SHO Club.
|
1402 Lehman St. Lebanon, PA 17046 (717) 274-9242. |
From Brad Rauch: "The owner, Don Witmer, is a knowledgable, honest and fair general mechanic. He is not a SHO specialist, but he has done quite a few things on my car and I recommend him for basic general repairs. He works at the Sears in Lebanon, too, and has this business on the side." |
|
Co-owner Keith performed "custom" alignment to
FAQ specs vs.
"it's within tolerance" for the standard alignment price. Advised me what would cost extra if needed and allowed me to watch the entire procedure. They are a General Mechanical Shop - no SHO specialty. |
|
Owner: Gary Meisnik
Terri has only used them for exhaust work, but
they do excellent work
|
If you want to recommend
a local dealer or parts supplier, please email Brad
with information.